12 Bay NAS using this new Motherboard I found in Aliexpress, still in modeling stages, and will be updated once parts arrived.

Target/ Design Goals:

Not too big but can accommodate about 12 Drive (To replace my Synology 5-bay)
Hot-Swap HDD (SATA + Power Cable will be glued to the HDD slots, so HDD can just slides in)

Part List:

Motherboard: N5095 with 12 SATA Port
SATA Cable: 12x SATA and Power Cable Combined
PSU: Any Flex ATX, you will also need more SATA power cable as normally Flex ATX PSU only have like 2 SATA Power
Fan: 2x Slim 12cm FAN + FanGuards
Various m3 Brass Insert, m3 Screws and Glue Gun

Feedback appreciated. This Printed fine, but was ultimately too big for my desk, so I designed a smaller 6 Bay model

12 Bay/ 6 Bay ITX NAS

by Anthonny · original on Printables ↗

Gadgets / Computers

♥ 203⬇ 1.0k🖨 0 prints

License: Creative Commons — Attribution — Noncommercial ↗

Print profiles

HDD Lock (x2 for 12 Bay).3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
HDD Guide (x2 for 12 Bay).3mfDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
HDD Cover (6 Bay).3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
HDD Back Cover (12 Bay).3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
MoBo Cover.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
HDD Cover (12 Bay).3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
HDD Backplane - TOP (x2 for 12 Bay).3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
HDD Back Cover (6 Bay).3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
HDD Backplane - BOT (x2 for 12 Bay).3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
MoBo Compartment.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Mobo Back Cover.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
HDD Compartment (12 Bay).3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
HDD Compartment (6 Bay).3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print