🖨️ Print Shop
Microbot Fidget

The Microbot Fidget is based on Hiro's Microbot from Big Hero 6

Both the parts snap fit together.

Print details:

  • Material Used : Prusament PLA Prusa Galaxy Black
  • Layer height: 0.15mm
  • Supports: No
  • Brim: Yes (Only for vertically printed parts {micro1 and micro2alt})
  • Infill: 20% ( I went with 100% coz I really liked the weight)

Tested it at 50% scale too and works fine. Scalability should not be an issue.

The model has been designed to have a satisfying tactile snap at 90 degrees angles.

Note:

There are 2 files for the socket joint part, print the recommended version and stick both halves using some superglue.

I haven't printed the alt version as I feel that there's a high chance of the part breaking (layer separation)

Microbot Fidget

by auc7us · original on Printables ↗

Toys & Games / Action Figures & Statues

♥ 708⬇ 2.9k🖨 26 prints

License: Creative Commons — Attribution — Noncommercial ↗toyrobotfidgetmodelsnapfitbighero6baymaxhiromicrobot

Print profiles

  • Micro 2 alt.stl

    ⏱ time and weight estimated after preparation · 1 material(s)

    Made to order: we prepare this file when you order, which adds a few minutes before printing starts.

    Prints on: A1 mini 0.4PLA

    Order this print

  • Micro 1.stl

    ⏱ time and weight estimated after preparation · 1 material(s)

    Made to order: we prepare this file when you order, which adds a few minutes before printing starts.

    Prints on: A1 mini 0.4PLA

    Order this print

  • Micro 2.stl

    ⏱ time and weight estimated after preparation · 1 material(s)

    Made to order: we prepare this file when you order, which adds a few minutes before printing starts.

    Prints on: A1 mini 0.4PLA

    Order this print

  • Microbot.stlDEFAULT

    ⏱ time and weight estimated after preparation · 1 material(s)

    Made to order: we prepare this file when you order, which adds a few minutes before printing starts.

    Prints on: A1 mini 0.4PLA

    Order this print