🖨️ Print Shop
Sanding Wedge

New version: https://www.printables.com/de/model/418290-sanding-wedge-v2 

I used an M6 screw and nut to clamp the sandpaper down. The screw and nut are glued in place.

I used PLA but ABS would be better.

You need to print 3 parts:

  • sanding_wedge
  • sanding_wedge_clamp
  • screw_nut_holder

You also need:

  • 1x M6 screw
  • 1x M6 nut
  • Sandpaper 50 x (>300)mm

Sanding Wedge

by Ralf Hörhager · original on Printables ↗

Hobby & Makers / Tools

♥ 1.8k⬇ 4.2k🖨 54 prints

License: Creative Commons — Attribution — Noncommercial ↗sandingthingiversesandingtoolschleifensandingwedgeschleifkeil

Print profiles

  • screw_nut_holder.STL

    ⏱ time and weight estimated after preparation · 1 material(s)

    Made to order: we prepare this file when you order, which adds a few minutes before printing starts.

    Prints on: A1 mini 0.4PLA

    Order this print

  • sanding_wedge.STLDEFAULT

    ⏱ time and weight estimated after preparation · 1 material(s)

    Made to order: we prepare this file when you order, which adds a few minutes before printing starts.

    Prints on: A1 mini 0.4PLA

    Order this print

  • sanding_wedge_clamp.STL

    ⏱ time and weight estimated after preparation · 1 material(s)

    Made to order: we prepare this file when you order, which adds a few minutes before printing starts.

    Prints on: A1 mini 0.4PLA

    Order this print