I decided to create my own water pump using a 775 motor I had lying around.
It is capable of some pretty hefty flow depending on how big you make the body and impeller.
If you find that your motor is overheating, lower the height of the impeller and body.
Components required:
- 12v 775 motor at your preferred RPM
- 5 countersunk M3x6 screws
- cyanoacrylate glue to seal the body if you notice any water leaking
Electric Water Pump
by Viccroy · original on Printables ↗
Hobby & Makers / Tools
♥ 255⬇ 2.0k🖨 9 prints
Print profiles
Impeller.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Cap.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Body.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print