Here's another modification I've done to be compatible with the Skadis Pegboard!

The easiest was putting the hook on. The hardest was making sure every controller I had was fully compatible. I used the modified ps4 controller holder as a base, but I added a few things:

• Added a few more circular recesses near the thumbsticks since I use an aftermarket pair of thumbsticks and they would be pushed up. With these added, it has enough space to be clear.
• Added circular recesses at the back, so you are able to place itjust in the corner if you would like.
• Added a cut in the middle of the holder, so it has enough space to hold a Nintendo Switch Pro Controller more comfortably, since it would be prone to slip out with the previous design.

You should print this sideways, since it'll have the most strength

I wouldn't trust the hooks to work too well if printed normally. Sure, you'll use up a bit of filament for supports, but it'll be a better print.

Printed in PLA. The filament I used was "PrimaValue PLA White" (Amazon affiliate link): https://www.amazon.co.uk/gp/product/B013IHXBSE/ref=as_li_ss_tl?ie=UTF8&psc=1&linkCode=sl1&tag=umar167-21&linkId=0b32cfbfa134ff977ea08f9a7c63c9f2&language=en_GB

Category: Video Games