I designed this simple pineapple charm to add some personality to your Bogg bag. After having lost several of these charm-type decorations on both Bogg bags as well as on Crocs, I designed this charm to stay securely attached via a threaded screw/bolt mechanism that passes through the bag's holes. The bolt itself has a large (US Quarter-sized) head to prevent the charm from pulling out of the hole once attached.

Printed without supports, threaded bits pointing up. I was able to print this very quickly and successfully using a 0.28mm layer height and printing at 70mm/s on my Ender 3 v2. I used Arctic Teal PolyTerra PLA for the print shown in the photos. I used 100% infill on the bolt part for added strength, but the main charm should only need 20-30% infill.