Hello Fidget friends! This is my 9th version and the first one I upload here. I think by now everything is perfect.

For the finished fidget you need the following parts:

- 1x part 1 (printed in the first color) when slicing the part I recommend to scale the 6 planet wheels {picture 4 the red ones} to 99% for X and Y, Z stays at 100%) the scaling can be between 98% and 100% depending on the printer and calibration, for me 99% worked best)
 

- 1x part 2 (printed in the second color)

- 1x optional tool (color doesn't matter, this "tool" is inserted in the middle of the finished fidget and clamped with the tang in the drill to "break in*" the fidget)

*break in
With the drill press, run the gear left and right for several minutes. Afterwards, I recommend adding some Teflon grease to the gear.

Finally, connect all four parts with some superglue.

Printer settings:

0.16 layer height 
3 wall lines
15% cubic infil
PLA