Corsi-Rosenthal Box (DIY Air Purifier) Connectors

Corsi-Rosenthal boxes (aka Comparetto Cubes) are a great DIY solution for air purification.

However, the traditional way of putting these together involves a bunch of duct tape, which is wasteful and tacky (pun not intended). It also means that you need to cut or remove the duct tape every time you need to replace the filters, which is a pain.

These connectors eliminate the need for tape, so replacing the filters is a breeze (pun intended this time). There is a small gap between the filters when using the connectors, so if you want to use some tape to make it airtight, you can still do that.

There are multiple styles to choose from, and you will need to print 4x bottom pieces (Style A or B) and 4x top pieces (Style C or D), according to this chart:

Style	Box Side	Supports needed?*	Compatible with 4-filter or 5-filter boxes?**	Fan retaining wall?
A	Bottom	No	4-filter only	N/A
B	Bottom	Yes	5-filter only	N/A
C	Top	No	both	No
D1	Top	Yes	both	Yes - Small
D2	Top	Yes	both	Yes - Large

These are the original version. Check out my remix for another version of these styles with thinner walls.

* See the attached pictures for how to orient and add supports for Styles C and D.

** A 4-filter box is intended to sit on the ground with the fan pointed up. Airflow only comes from the sides. A 5-filter design is intended to be suspended or otherwise propped up off the ground and allows airflow from all directions.

Corsi-Rosenthal Box (DIY Air Purifier) Connectors

by WillDeed · original on Printables ↗

Healthcare / Home Medical Tools

♥ 172⬇ 888🖨 7 prints

License: Creative Commons — Attribution — Noncommercial — Share Alike ↗diyhepapurificationpurifierhepafiltercovid19covidhackthepandemiccovid19protection3dforcovidanticovidairpurifiercorsirosenthalboxcorsirosenthalcomparettocubecomparettocrbdiyairpurificationdiyairpurifier

Print profiles

Coris-Rosenthal Box connector - Style B - BOTTOM_ONLY - 4_filter_version.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Coris-Rosenthal Box connector - Style A - BOTTOM_ONLY - 3_filter_version.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Coris-Rosenthal Box connector - Style D1 - TOP_ONLY.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Coris-Rosenthal Box connector - Style C - TOP_ONLY.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Coris-Rosenthal Box connector - Style D2 - TOP_ONLY.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Coris Rosenthal Connector-extensions-2x.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Coris Rosenthal Connector-extensions-3x.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print