I wasn't satisfied with other existing paint storage designs - either they took too long to print, or seemed more appropriate for laser cutting. I designed my own with a goal of making it simple and quick to print.
Fits Vallejo 17ml bottles and similar (Army Painter, misc 15ml bottles, etc..)
Either print a single rack and one brace, or two racks and a tall brace. Attach together with hot glue.
Designed for a 0.6mm nozzle and large layer heights (0.3mm or 0.35)
Save time by not printing the bottom layers solid. I used a modifier in PrusaSlicer to set the bottom 3mm to 0 top and bottom layers and 20% gyroid infill.
Print the brace with vase mode & 5+ bottom layers
Vallejo Paint Rack
by Stu Cameron · original on Printables ↗
Hobby & Makers / Organizers
♥ 484⬇ 3.9k🖨 18 prints
Print profiles
paintrack4-brace.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
paintrack4-brace-tall.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
paintrack4.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print