ebay note: A 3D print of this this model is currently illegally sold @ https://www.ebay.ie/itm/314569335395

/314580358088

/314673977931

PV tool for use with both MC4 and EVO2 style solar connectors.

⚠WARNING⚠ Tool was design based on connectors made by Staubli/Multi-Contact, there is absolutely no guarantee it will be compatible with other brands.

Multifunctional spanner that can be used to:

• hold connector nut
• hold connector body
• disconnect female and male pair

Please excuse the poor quality of my print, I had only a roll of old PET-G to work with. Print Settings ==============

Printer:

Craftbot+

Resolution: 

0.2

Infill:

15-30%

Filament:

Nebula PET-G

light brown

Notes:

As with most thin prints key to structural strength is number of walls, 4-5 should be sufficient, infill % doesn't matter as much.
PET-G's springiness works nicely especially for the fork end of this tool (use it to disconnect mated connectors).

How I Designed This

Based on connectors made by Staubli / Multi-Contact

⚠WARNING⚠
Tool was design based on connectors made by Staubli/Multi-Contact, there is absolutely no guarantee it will be compatible with other brands.

Category: Hand Tools