AA Rear shell is here!

USBC Rear shell is here!

This model is designed specifically for the Funny Playing IPS screen mods.

PRINTING: 

I have had successful prints with 0.4mm and 0.6mm nozzles at 0.2mm layer height with PLA, PETG, and ABS. 

Support is required! I use organic supports on the IPS screen mounts.

UPDATE: 

ST01.1 - 31 May 2024

1. The exterior edge chamfer angle was changed from 45° to 55° for printability

2. Adjustments to motherboard mounting post(s) location

3. Adjustments to the details near the power switch cutout

4. Adjustments to the details near the volume cutout

5. Added cutout details for EXT. to match the original shell

6. All new speaker grill holes

7. The speaker grill hole chamfer angle was changed from 45° to 65° for printability

8. IR window adjustments

ST01.2 - 20 June 2024

1. Adjustments to motherboard mounting post(s) location

2. Audio jack cutout redesign

ST01.3 - 25 November 2024

1. Audio jack fillet added

2. IR window adjustments (again lol)

ST01.4 - 27 March 2025

1. Minor design tweaks

2. IR window adjustments to work with Printable Rear Shell

 S V2 (formally ST01.x) - August 2026

1. New speaker hole pattern (size, spacing, etc.)

2. Redesigned screen lens shape (fits way better now)

3. Minor design tweaks and refinement.

FEEDBACK:

If there are specific issues with the model, please DM me on Printables or Instagram so I can update the model for everyone!