A modification to the  Droneholder designed by Skyline989 that holds thicker drones more easily.  

I found some drones would struggle to fit in the original design . 

I also designed a locking clip this is not needed, but it makes the connection to the peg board more secure.

The clip can be insert  from the back of the pegboard to lock the holder in place . If you cant access the back of your board you can cut trip the tips off the locking clip and insert it from the front .

Printing instructions 

IKEA_Skadis_Drone_Holder : The drone holder can be printed in any thing even PLA , with PLA 40% infill seems to be strong enough that the hooks will hold . I also used a layer Hight of 0.2mm.  

IKEA_Skadis_Clip : These can be printed in any thing , use 100% infill so they clips don't break.