When I printed the “ATX PC bench case” from Chyneuze, I found out it wasn't actually ATX but mATX and my motherboard didn't fit the thing because the screw holes didn't line up.

I then took his work and modified it, so it can fit an ATX motherboard. I also changed the tolerances a little bit as for me the printed parts had an inner diameter of around 14,5mm - 14,7mm instead of 15mm.

Furthermore I changed the radiator mount to comply with the wider motherboard and still be able to fit a 240mm radiator as well as a 360mm radiator.

For those using an air cooler and wanting full stability I added modified parts for an aluminium pipe. Just use a 340mm long 15x15mm aluminium profile to connect the Top_stabilizer_Left and Top_stabilizer_Right parts.

Theres also two simple caps for those, who don't want any extra stability, which I wouldn't recommend though.

Tl;dr:

print following files for 240mm radiator system:

additional stuff needed:

2x 450mm 15x15mm aluminium extrusion

print following files for 360mm radiator system:

additional stuff needed:

2x 450mm 15x15mm aluminium extrusion

print following files for air cooler max stability system:

additional stuff needed:

2x 450mm 15x15mm aluminium extrusion
1x 340mm 15x15mm aluminium extrusion

print following files for minimum stability:

additional stuff needed:

2x 450mm 15x15mm aluminium extrusion

Have fun!

Full ATX PC Bench / PC Case

by Nick · original on Printables ↗

Gadgets / Computers

♥ 447⬇ 1.1k🖨 3 prints

License: Creative Commons — Attribution — Noncommercial ↗casecomputerpcgpubenchrigmainboardmotherboardcpuatx

Print profiles

09C_Top_Cap.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
04_Mobo_support_right_lower.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
09C_Top_Cap2.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
06A_Top_Radiator_right.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
05_Mobo_support_right_upper.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
03_Mobo_support_left.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
08B_Top_stabilizer_Left.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
08B_Top_stabilizer_Right.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
06A_Top_radiator_left.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
01_Mobo_leg_left.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
02_Mobo_leg_right.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
06B_Top_Radiator_right_360mm.stl.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
06B_Top_radiator_left.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print