🖨️ Print Shop
Iphone Lightning Dust Plug

This model was made using the Iphone lightning port on an Iphone 12 mini as a reference with good calipers. The measures where offset with 0.2 [mm] as this seem to be the common error for many printers. The print has a small foot so that it can easily be removed. Takes about 2 minutes to print.

Material: Extrudr Medium TPU.

Settings: 0.12 [mm] layer height.

Iphone Lightning Dust Plug

by Vendelator · original on Printables ↗

Hobby & Makers / Electronics

♥ 79⬇ 1.2k🖨 11 prints

License: Creative Commons — Attribution ↗plugtpuchargingcoveriphonedustlightningdustcoverlightningcable

Print profiles

  • Iphone Lightning Dust Plug.3mfDEFAULT

    ⏱ time and weight estimated after preparation · 1 material(s)

    Made to order: we prepare this file when you order, which adds a few minutes before printing starts.

    Prints on: A1 mini 0.4PLA

    Order this print