Set of sprockets or gears for the chain listed below. Each pair is a set screw locking hub and a idler style. 10, 15, 20 and 30 tooth to get many ratio options.
https://www.thingiverse.com/thing:3313211
fischertechnik compatible parametric print in place gear chain
This chain looked like it would work with sprockets. These sprockets/gears are designed to be used with the vintage Gilbert Erector Set of which I have a collection.
The axle size is 4mm nominal for the pulleys and gears in the construction set. The axle holes may have to be drilled as needed to fit. The set screw holes need to be drilled 2.5mm and threaded for 6-32.
I followed instruction for printing the chain and had good results with 0.16 layer and 3 walls and triangle 50% infill. The chain needs each link broken free, using care, by hand with a flat style needled nose plyers.
Use these Tinkercad links to modify for your own use: https://www.tinkercad.com/things/26aHBOcTcv1 https://www.tinkercad.com/things/11dVm8HRFgD https://www.tinkercad.com/things/7yYsuiGNrAP https://www.tinkercad.com/things/1VgmrO9DXt2
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.16
Infill:
50% triangle
Filament: Hatchbox PLA White
Notes:
Bed temp 60
Nozzle 205
Speed 60
Category: Construction ToysSprockets/Gears For Print In Place Gear Chain - Fischertechnik
by Cal LF · original on Printables ↗
Toys & Games / Building Toys
♥ 141⬇ 1.3k🖨 1 prints
Print profiles
15_Tooth_Gear.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
10_Tooth_Gear_Idler.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
10_Tooth_Gear.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
20_Tooth_Gear.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
chain_flat_30_link_.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
15_Tooth_Gear_Idler.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
chain_flat_10_links.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
20_Tooth_Gear_Idler.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
30_Tooth_Gear.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
30_Tooth_Gear_Idler.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print