STLs

All files are in correct Z orientation

Main (Use one of the following) +main.stl (for ~22.5mm handlebar) +main-short.stl (shorter stem) +main-32mm.stl (for ~32mm handlebar)

*jaw.stl *screw.stl

Clip (Use one of the following) +clip.stl (for ~22.5mm handlebar) +clip-with-loop.stl (use this if you want to hang a bag on your scooter that uses velcro loops, and you don't have any space left on the handlebar) +clip-32mm.stl (for ~32mm handlebar)

Screws & Nuts

*4x M4x20 *8x 10mm Washers *4x M4 Nuts *1x M4x50 (screw this inside the printed screw to strengthen it)

About the design

This is originally designed to fit Xiaomi M365 Pro scooter which has ~22.5mm diameter handlebar. But should fit on most bikes or scooters that have a straight handlebar. It needs 45mm of handlebar space. Phone sizes I've tries are from small iphone 5 to large "max" sized iphones.

If you need a custom size...

Comment if your handlebar is much bigger than 22.5mm, and i can give you updated STL. :)

My handlebar diameter is 22.5 mm, but it should fit few mm bigger handlebars as well. For smaller diameter, you can use rubber padding.

Print Settings

Rafts:

Supports:

Resolution:

0,3 or less

Infill:

20% or higher

Notes:

No supports needed, and all files are in correct Z orientation. For extra strength increase Perimeters to 3 (or more) instead of infill (20% is enough).

Category: Mobile Phone

Scooter / Bike Phone Stand Mount (M365)

by PlasticBarista · original on Printables ↗

Gadgets / Portable Devices

♥ 601⬇ 2.6k🖨 12 prints

License: Creative Commons — Attribution — Noncommercial — Share Alike ↗standphonestandphoneiphonebicyclebikexiaomicyclescooterthingiversem365plasticbarista

Print profiles

clip-32mm.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Clip.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Main.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Clip-With-Loop.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Screw.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
main-32mm.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Jaw.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Main-short.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print