Phone Stand with honeycomb structure, it also has a place for charging your phone.

I recommend you print this on its side, I printed it with some custom supports. However, I don't think you'll need supports if you print it on its side.
I printed it with PLA on an Ender 3 v2

I've tested it with apple and android devices. It even works with a Nintendo Switch!
Please note, My model is not to be printed and sold.

Update 2023/08/10
Added Phone Stand Thicker.stl
I have added a slightly thicker version where the walls between the honeycombs are thicker.
Refer to red phone stand in photos.

Phone Stand

by PlatinumStars · original on Printables ↗

Gadgets / Other Gadgets

♥ 11.4k⬇ 85.9k🖨 743 prints

License: Creative Commons — Attribution — Noncommercial ↗standphonestandphoneiphoneandroid

Print profiles

Phone Stand.stlIN STOCKDEFAULT
⏱ 1h 20m · 28 g · 60 × 73 × 72 mm · 1 material(s)
Prints on: A1 mini 0.4PLA
Order this print
Phone Stand thicker.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print