Another Self-Watering Planter that is fully 3d-printable and should help you to make your life easier. Plant your plant like basil and add water, that is it.
Added a pot version without a cutout
Print Settings
Rafts:
No
Supports:
No
Resolution:
0.12
Infill:
20
Filament: Sunlu ABS Red
Notes:
I used ABS, PLA or PETG should also work
Post-Printing =============Try out if your reservoir is water tight
Before you use your 3D print try out if it is water tight.
I used epoxy just to be sure. It is also possible to use a water tight wood glue.
Self-Watering Plant Pot
by lukki15 · original on Printables ↗
Household / Outdoor & Garden
♥ 122⬇ 1.1k🖨 2 prints
Print profiles
pot.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
pot_without_cutout.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
reservoir.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print