Parameters:
- HoleSpacing - How far apart the center of each peg is. Default = 25mm
- PegHoleDiameter - The width and height of each square hole. Default = 5.5mm
- PegboardHeight - How tall the pegboard is, which dictates stiffness. Default = 5mm
- PegExtraWidth - Can use to make the pegs slightly wider in order to eliminate side to side movement. Default = 0.1mm
- NumberOfHolesInXDirection - How many holes wide the pegboard is. Default = 8
- NumberOfHolesInYDirection - The number of holes tall the pegboard is. Default = 8
- SnapConnectorTolerance - The spacing between the snap connector and the pegboard hole. Default = 0.3mm
- FastenerHoleDiameter - The diameter of the hole in the snap connector to nail the pegboard to the wall. Default = 3mm
- PegClearance - How much smaller the peg is than the hole so that it can slide in and out. Default = 0.42mm
Instructions:
Minimum viable print settings to minimize material use while remaining perfectly strong (about 80g per 200x200mm pegboard panel):
Bottom layers: 2
Top layers: 3
Infill: 15%
- Print ‘1x2 Pegboard .stl’ to test fits against.
- Print ‘1x1 Snap’ and ‘Peg.stl’.
- If for some reason the snap connector doesn't snap in or the peg doesn't fit in snugly, adjust SnapConnectorTolerance and PegClearance respectively.
- Repeat steps 2 and 3 until you get the fit juuuust right.
- If you had to change parameters, export new ‘1x1 Snap.stl’, ‘1x2 Snap.stl’, ‘2x2 Snap.stl’, ‘Peg.stl’, and 'SideWallSupportPeg.stl'. You do not have to re-export the pegboard sizes, unless you want a custom size I have not already exported.
- Print all the pegboard you heart desires!
Tips:
- You can mount pegboard horizontally to create a shelf, or vertically (perpendicular to the wall) to create more pegboard surface area with less wall space. The SideWallSupportPeg allows you to lock shelves or perpendicular vertical pegboard in place.
- Make the topmost and bottommost layer use the concentric pattern to create a nice looking surface.
Modular Pegboard - 100% Parametric Design
by LittleGreenFire · original on Printables ↗
Hobby & Makers / Organizers
♥ 242⬇ 2.3k🖨 2 prints
Print profiles
2x8 Pegboard.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Peg.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
3x6 Pegboard.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
2x2 Clip.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
2x2 Pegboard.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
8x8 Pegboard.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
1x2 Pegboard.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
4x8 Pegboard.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
2x4 Pegboard.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
3x3 Pegboard.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
1x5 Pegboard.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
1x1 Pegboard.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
4x4 Pegboard.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
ShelfLockerPeg.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
9x9 Pegboard.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
1x1 Clip.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
1x2 Clip.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print