3U cage to mount up to 6 3,5" SATA drives in a 10 inch rack cabinet.
2,5" SSD are supported with the provided adapter.
Do not print in PLA. The heat and the weight WILL eventually deform it.
Requires a 10"+ build plate (254mm). A Prusa i3 or an Ender 3 is not big enough.
I printed the cage and the back cover in PETG with the front plate laying on the bed and no supports.
The 3,5 inch HDD adapter should be printed in TPU and provides some vibration isolation. The HDD should be secured with screws (6-32 x 1/4")
The 2,5 inch SSD adapter should be printed in a more rigid material. The SSD should be secured with screws (M3x6).
The back cover is meant to be screwed on the back of the cage with 4x M3x10mm screws and M3 brass inserts.Â
HDD cage for 10 inch rack
by heron · original on Printables ↗
Gadgets / Computers
♥ 170⬇ 868🖨 2 prints
Print profiles
Rack itx 3.5 inch hdd adapter.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Rack itx 2.5 inch ssd adapter.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
back cover.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
rack hdd.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print