These feet slide onto the back of the Lenovo Legion 5 Pro laptop for a fairly secure fit. You can pick up the laptop and the feet will stay attached. They do not interfere with the monitor hinge, so you can open / close the lid with the feet attached.

Print in orientation provided such that it does not require any supports. I do recommend a brim and at least 3 perimeters. Print in either PETG or ABS / ASA, as these parts will have to deal with the hot exhaust of your laptop. PLA might work for you, but don't complain about strenght issues ;)

Update 29-12-2022:

After one of these 3d printed feet got stuck behind an obstacle and snapped I've updated the design to v2. This revision has a slightly thicker back and added material to the ‘beams’ accross the exhaust. Allignment of the holes w.r.t. exhaust on the laptop has also been slightly improved.

Update 11-01-2023:

Created 2 additional heights to choose from.

Default version is about 45mm. Now you can also choose for a 20mm and 30mm height. Please note that I have not tested these myself, but were added upon request.