Print in Place No Support Compact Folding Dice Tower Box
Be advised, this model is not suitable for large D&D dice, you should instead print the bigger and easier to print Dice Tower if you plan to use it with D&D dice
Compact Folding Dice Tower and Box
- Print in Place
- No Support
- No Brim
Print Instructions
- It is a tight fit, make sure your printer is well calibrated
- careful there is one very long bridge
- Print the parts in PLA
- Nozzle diameter: 0.4 mm
- Layer height: 0.2 mm
- Perimeters: 2
- Fuzzy Skin
- Outside walls
- Tickness: 0.2 mm
- Distance: 0.2 mm
Dice Tower
by DaHouzKat · original on Printables ↗
Toys & Games / Board Games
♥ 721⬇ 4.1k🖨 53 prints
License: Creative Commons — Attribution — Noncommercial — NoDerivatives ↗dicetowerprintinplacefoldingfoldablecompactdicebox
Print profiles
Compact_Dice_tower.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Honeycomb_Compact_Dice_Tower.3mfDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print