Simple wall hook designed for personal use. Figured it would be nice to share the simplicity with the world.

Can be printed with every material (I print mine in PLA), just remember to support the tip of the hook. Normal supports will do, but I'll recommend using tree supports from Cura. Set infill according to your strength preferences.

Mount using double-stick tape directly to the wall, but if you want, you can drill two holes in the base of the hook and place it on two screws - tape's just been an easier option for me.

Sample gcode is generated with Cura (0.15 layer height, tree supports for the tip, PLA profile, 50% gyroid infill).

Happy printing!