This is the Xanoy's awesome phone holder with a middle cutout so you can pull the phone from the stand without having to disconnect the cable.

All the credits for this neat design go to Xanoy.

---

Print Settings

I printed the model scaled up to 125% to fit a phone with bumper. You can print the base with 100% infill to add weight to the stand, and the rest at 15% infill. I used a brim to be on the safe side.

Don't forget to add support for the middle cutout, otherwise it will not print correctly.

You can notice some dots of under-extrusion in the photos, but it has nothing to do with the model, this is either my print settings or inconsistency in the cheap PETG filament I used.