Folding hook. Size 40x60x13mm (without cover) 48x24x13 (with cover)
My print settings
- Material: PETG
- Layer height: 0.15mm
- Perimeters: 6
- Orientation of the hook on the bed: Side
- Supports: No
Updated (added)
Added alternative cover mounted under frame.
For easier printing and better building I made cover, which is screwed with frame to the wall.
Print settings
- Material: PLA or PETG
- Layer height: 0.15mm
- Perimeters: 2
- Supports: No
Foldable hook
by RostaP · original on Printables ↗
Household / Other House Equipment
♥ 10.8k⬇ 17.0k🖨 186 prints
Print profiles
frame.stlIN STOCKDEFAULT
⏱ 11m · 4 g · 40 × 16 × 13 mm · 1 material(s)
Prints on: A1 mini 0.4PLA
Order this print
hook.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Cover.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
stick.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
alternative-cover-mounted-on-wall.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
alternative-cover-mounted-on-wall-4-hooks.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print