Printed in black Prusament PETG, 0.2mm layer height.
Perfect fit with buttonhead SPAX 3x16 screws also in thin walls (d>=10mm)
(https://www.amazon.de/SPAX-Universalschraube-Halbrundkopf-Vollgewinde-0201010300163/dp/B00725C6CG?th=1)
Make sure to print on the side for higher strength.
I added a STEP and STL file, so feel free to change and update the design (set as remix).
I added the gcode files for mini+ and also a version with 3 hangers, to speed up the process if you want several.
EDIT: I added a file without holes for glue mount
Helmet hanger
by Janoe · original on Printables ↗
Sports & Outdoor / Outdoor Sports
♥ 101⬇ 545🖨 14 prints
Print profiles
Helmet hanger.STLDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Helmet hanger no holes.3MF
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print