Just a hanger for kitchenaid mixer attachments.
You'll need #6 countersunk screws to install them.
(I only had #8 screws on hand so the screw heads are sitting a bit proud in the photo)
Edit: added the step file for anyone who wants to modify it
Edit_2024-12-11: Added a guide tool to help with installing them straight & evenly spaced.
The spacing on the tool is set to what I'd recommend for minimum spacing without interference/annoyance when using these.
To use the install tool: Print all 3 pieces, superglue the 3 pieces together, then tape the tool to the underside of the cabinets where you want to install the hangers. The space will also hold your hangers in place while you install them.
Edit_2_2024-12-11: Added a printable PDF install guide (US Letter size; 8.5in x 11in)
--it's an alternative to the 3d printed guide
Kitchenaid Attachment Hanger
by iplop · original on Printables ↗
Household / Kitchen
♥ 1.5k⬇ 5.1k🖨 62 prints
Print profiles
KitchenAidMixerHanger.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Hanger Install Guide C.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Hanger Install Guide A.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Hanger Install Guide B.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print