Object Description:

Orange peeler.

Using the front side, cut the peel into several pieces. Lift it with the flat end of the peeler and remove the pieces.

If you need a version with a lower cutting depth or any other modification, don't hesitate to contact me.

Update from 2024-02-02:

Version with included mouse ears added which can be easily snipped off.

Update from 2022-03-28:

Print settings regarding brim updated.

Print settings:

Material: PLA

Layer height: 0,1mm

Infill: 20%

Perimeters: 3, 4 at the cutting head (already included in the 3mf-file)

Brim: not required with a good first layer adhesion, otherwise due to the thin end recommended. As an alternative, you can use the version with included mouse ears.

Support: no

All top surfaces ironed

Orange peeler / Orangenschäler

by JBoe · original on Printables ↗

Household / Kitchen

♥ 191⬇ 2.3k🖨 38 prints

License: Creative Commons — Attribution — Noncommercial ↗orangepeelercitrusschaelerorangepeelerschaelhilfecitrusschaelercitruspeelerorangenschaeler

Print profiles

Orange Peeler.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Orange Peeler.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Orange Peeler - with mouse ears.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print