The Vase was printed on a Geeetech A10M with the dual color extruder hence the color gradient.

Here is an article if you want to learn more about waterproofing a print.

After a bunch of trial and error the following settings worked for me to waterproof the vase:

8 bottom layers
Slow print speed of 25mm/s
Line width of .8mm
Layer height of .3mm
A .6mm nozzle

Since I did the prints with a Geeetech machine, I sliced the STL in Cura. The profile is also uploaded as a .txt (.curaprofile is not supported) if you want to recreate my settings in PrusaSlicer.

The height of the vases in the pictures is 22cm.

The material I used was PolyTerra PLA Arctic Teal, Candy and Renkforce PLA white.

Diamond Flower Vase (waterproof)

by PrintOtter · original on Printables ↗

Household / Home Decor

♥ 277⬇ 1.8k🖨 25 prints

License: Creative Commons — Attribution — Noncommercial — Share Alike ↗vasegeometricgeometryvasemodeflowervasewaterproof

Print profiles

diamond_vase.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print