One more case for Raspberry Pi Zero. This is simple, compact and quite rigid.

The cover part has press fit with the main case. The board sits on four pins and from top is pressed by the cover part. Nominal clearances between the board and the case are 0.5 mm, USB/HDMI ports stick out of the board - this forces the assembly in a certain way.
To insert the board into case, first push down the GPIO side and then gently push side with USB/HDMI ports. While pushing USB/HDMI side of the board , you could try to slightly bend out this side of the case.

The board sits firmly in casing without any screws. Press fit ensures that cover part don't fall out itself, but you could disassembly it easy if needed.

Print settings:

Layer height: 0.2 mm
Perimeters: 2
Infill: 20%
Supports: No

Update

Added model variant (only STL files) with increased clearance around the board :

Case.stl, CaseTop.stl - original model with 0.5 mm clearance to the board;
Case_vB, CaseTop_vB.stl, CaseTop_vB_Closed.stl - model with 1.5 mm clearance to the board.

CaseTop_vB_Closed - alternative closed lid for Raspberry Pi without pins.

Raspberry Pi Zero case

by LuluX · original on Printables ↗

Gadgets / Computers

♥ 325⬇ 3.0k🖨 49 prints

License: Creative Commons — Attribution — Noncommercial — Share Alike ↗caseraspberrypicaseraspberrypizeroraspberrypihousing

Print profiles

RPIZEROCase.3mfDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Case.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
RPIZEROCaseTop.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
CaseTop.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Case_vB.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
CaseTop_vB.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
CaseTop_vB_Closed.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print