Here is a remix of the awesome Original Series tricorder designed by Wythkyn. It was reworked to assemble easier and look closer to the original prop. The parts all connect with notches and cutouts to align everything. The black parts are smooth so you can texture with paint if you want (I don't know how to model them with the texture yet). It uses 6x2mm magnets to secure the doors and flip top. It also features a medical hand scanner that fits into the lower compartment.

Display stand and graphics (zip file) included.

Supports are needed for lid housing (4) and very minimal support is needed for side edges of lower door (24). Everything else should print support-free.

Part options:

Plain grill (9a) option so you can use infill to gain a nice mesh pattern of your choosing. To do this, set it to have 0 top layers, 1 perimeter, set the infill pattern to something like Line or Rectilinear, and increase the infill density to 50%. You can adjust the infill angle too.
Scanner-1 (26a) option intended for vase mode to be more transparent if using clear filament.
Combined (17a) memory discs and rack for convenience.
Hollowed screen (5b) that is intended to print tilted for better quality appearance. Print at .15mm layer height for best results. It has built-in removable supports or you can just fold them back. Highly recommend using this version if you aren't going to use graphics.
Flat screen (5a) for adding graphics.

Advice for printing some other parts:

The moire disc looks best if you enable 'Detect thin walls' or equivalent setting in your slicer, or by using smaller nozzle. I printed mine in two colors, black first then swapped to silver which came out looking perfect. Highly suggest using color swap for it.
The memory discs should be printed at .15mm layer height for best results with the steep sloping edges of the rings.

fullcarbonbike remixed this to be more accurate, check out their files here: https://www.printables.com/model/170858-star-trek-tos-tricorder-remix/files

PLA filament colors used were:
Ziro silk silver
Ziro dark gray
Overture matte black
CC3D silk antique gold
Clear and clear blue colors were from a generic sample pack

Here is a guide that explains how color swapping works, at least with Prusaslicer: https://help.prusa3d.com/en/article/color-change_1687

Star Trek TOS Tricorder

by 𝗨𝗻𝗶𝗺𝗮𝘁𝗿𝗶𝘅𝗥𝗲𝗱🪐🌠 · original on Printables ↗

Costumes & Accessories / Props

♥ 377⬇ 2.3k🖨 23 prints

License: Creative Commons — Attribution ↗originalcosplayscifiseriesscanner

Print profiles

Star Trek TOS Tricorder 20. Mid Support-silver.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Star Trek TOS Tricorder 19. Disc Rack-silver.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Star Trek TOS Tricorder 14. Moire Panel-black 1.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Star Trek TOS Tricorder 5. Screen-clear or gray.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Star Trek TOS Tricorder 21. Compartments-black 1.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Star Trek TOS Tricorder 18. Divider-silver 1.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Star Trek TOS Tricorder 1. Panel Left-black.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Star Trek TOS Tricorder 4. Lid Housing-black 1.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Star Trek TOS Tricorder 3. Back Panel-black.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Star Trek TOS Tricorder 11. LEDs 1.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Star Trek TOS Tricorder 12. Knobs-silver.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Star Trek TOS Tricorder 6. Screen Panel-silver.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Star Trek TOS Tricorder 2. Frame Left-silver.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Star Trek TOS Tricorder 22. Upper Door-black.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Star Trek TOS Tricorder 30. Scanner 5-gold.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Star Trek TOS Tricorder 26. Scanner 1-clear.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Star Trek TOS Tricorder 7. Frame Right-silver.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Star Trek TOS Tricorder 15. Moire Disc-silver.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Star Trek TOS Tricorder 17. Memory Discs-silver.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Star Trek TOS Tricorder 26a. Scanner 1-clear for Vase Mode.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Star Trek TOS Tricorder 9a. Grill-gold For Infill Pattern.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Star Trek TOS Tricorder 13. Top Support-silver 1.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Star Trek TOS Tricorder 27. Scanner 2-silver.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Star Trek TOS Tricorder 16. Moire Ring-silver 1.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Star Trek TOS Tricorder 25. Bottom Panel-silver.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Star Trek TOS Tricorder 10. Bezels-gold 1.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Star Trek TOS Tricorder 23. Door Handles-silver.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Star Trek TOS Tricorder 28. Scanner 3-black.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Star Trek TOS Tricorder 17a. Memory Discs and Rack combined-silver.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Star Trek TOS Tricorder 21. Compartments-black.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Star Trek TOS Tricorder 5a. Screen Flat.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Star Trek TOS Tricorder 29. Scanner 4-silver.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Star Trek TOS Tricorder 5b. Screen Hollow Tilted.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Star Trek TOS Tricorder 24. Lower Door-black 1.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Star Trek TOS Tricorder 9. Grill-gold.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Star Trek TOS Tricorder 8. Panel Right-black.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Star Trek TOS Tricorder-Stand Legs.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Star Trek TOS Tricorder-Stand Base.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Star Trek TOS Tricorder-Stand Tag.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print