You like my Work?

Support my efforts and push the like ❤️

Make my day and post yout Makes 🤗

This Cable Organizer has some improvements and advantages compared to the existing ones. Big Version (90mm) for up to 2m Cables the regular Mini Version (63mm) is for USB-C Only up to 1m Cable.

UPDATES

28.01.22 > Added New Caps Designs (Plane and Fingerhutch)

31.02.22 > Added the Mini Version and New Caps (Plane and Fingerhutch) and I added a Mini Version with no Bridge to get in other Cables with bigger Plug

04.03.22 > New Mini version 1.3 with improved tolerances added. That some makers had reported problems.

The Design

The cables are better protected against cable breakage due to excessive bending during winding
Winding and unwinding is much easier due to a larger spool plate.
Nice and handsome 😎
Attention was paid to easy printability without support material.

Print instructions

Simple print!
No support needed!

10% Gyroid infill is sufficient!

PLA and PETG gives a very good results on 0.3mm for the Mini you need at least 0.2mm of course with original Prusament! ;-)

Happy Printing!!!

The Handsome Cableorganizer

by GiantBrain · original on Printables ↗

Hobby & Makers / Organizers

♥ 2.0k⬇ 8.1k🖨 109 prints

License: Creative Commons — Attribution — Noncommercial — NoDerivatives ↗boxorganizercableusbusbcwirecableboxcabeboxchargercable

Print profiles

CableOrganizer_V1.1.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
CableOrganizer_V1.1_Cap_Fingerhutch.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
CableOrganizer_V1.1_Cap_Plane.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
CableOrganizer_Mini_V1.3_Cap_Plane.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
CableOrganizer_Mini_V1.3_Cap_Fingerhutch.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
CableOrganizer_Mini_NoBridge_V1.1.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
CableOrganizer_Mini_V1.3.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print