Intro

Its the Eiffeltower not much to say other than this model can be printed with your glorified gluegun aka FDM printer like a Ender oder Prusa.

ko-fi.com/yell3d

Printsetting

Scale	its 220mm, 240mm upscale show be fine
Layerheight	0.2 or 0.3 (photo is 0.3)
Perimeter	2 or more
Infill	does not really matter, i left is as 10% Gyroid
top layer	0.6mm+ so 2 for 0.3mm or 3 for 0.2 layer height
bottom layer	same as top, but more wont hurt
Supports	none, but a 5mm brim helps if you have warping

Postprinting

remove the brim, if any, with a hobby knive or deburring tool
remove fine stringing with pulsing a small torch (like the this used for Crème brûlée)
torch the large arc's and push it in if you have weak cooling.

If your Extruder sucks, buy one from a reputable China vendor like

(They have better Extruder, but these require custom print heads and only work as direct drive)

Or feel free to buy from local 3d Vendors (see voron Discord), Amazon may not be the best place.

Eiffel Tower FDM printable

by Yell · original on Printables ↗

World & Scans / Architecture & Urbanism

♥ 1.7k⬇ 15.0k🖨 178 prints

License: Creative Commons — Attribution ↗artmk3spariseiffelarchitecturelovephotographytraveltoureiffelfranceeiffeltowereuropetorreeiffeltravelphotographyinstagoodparismonamourparismavilleparisianstylephotoofthedayigersparispicofthedayparisphotothisisparisparisfranceeiffeltoweratnightparisjetaimetopparisphotovisitpariseiffeltowerparisparisienne

Print profiles

FDM_Eiffel_Tower.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print