This is my first attempt at modeling anything more complex than a toy rocket in fusion360. This box features print in place hinges and a snap / latch to hold it closed. The sides have mostly decorative handles.

This prints well at .2mm layer height. You'll need to print the box and two handles.

Supports may be needed depending on the material you use. I use paint on supports, automatically enforcing supports at 15 degrees.

You may find the lid of the box can warp during print - this can be fixed with a brim or helper disks.

print-in-place treasure chest

by Severeon · original on Printables ↗

Toys & Games / Other Toys & Games

♥ 414⬇ 4.0k🖨 36 prints

License: Creative Commons — Attribution — Noncommercial ↗boxcontainerpiratedndfusion360treasurechestprintinplacediceboxtreasurechesthingedboxliddedbox

Print profiles

pirate-treasure-box v15.obj
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
handle.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
box.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print