Used a template of an existing button and have customized it to make my own design out of it. Looks certainly wonderful when this is printed with copper-filled filament or painted accordingly.
Original: https://www.knoepfe.de/Steampunk-Knopf-aus-Metall-in-Zahnradform-messing
- Ø15mm | 4,5mm thickness
- due to the very fine details i would recommend a 0,2mm Nozzle …
- ... if not available I have created a 50% larger version (Ø22mm | 4,5mm thickness)
- Works without support!
See also: https://www.prusaprinters.org/de/prints/120963-steampunk-button-i
Steampunk Button II
by eltimbo1991 · original on Printables ↗
Fashion / Other Fashion Accessories
♥ 152⬇ 790🖨 5 prints
Print profiles
button_steampunk_2.STLDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
button_steampunk_2_150%.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print