I couldn't find a shelf for Skadis that could be printed in one part and that fit on the Prusa Mini build plate. Inspired heavily by Ikea Skadis Shelf by xyren, I made one.
The shelf uses 4 peg holes and more can be mounted next to each other to create a longer shelf. I have made one with 65mm depth and one with 100mm depth.
Update 08.04.22
I have added an updated version of the 100mm shelf. I had a few issues where stuff kept falling of the shelves, so the updated version has a bit tighter fit in the hook to keep it from drooping slightly. I also thought about adding a lip, but that would complicate the print somewhat, so insted I added a slight upwards slope on the shelf as well (0,5 degrees).
The four braces underneath was probably a bit overkill as well, so I removed two of them to save some plastic.
Shelf for IKEA Skadis
by Tinker · original on Printables ↗
Hobby & Makers / Organizers
♥ 561⬇ 3.0k🖨 31 prints
Print profiles
SkadisShelf 100mm.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
SkadisShelf 65mm.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
SkadisShelf updated 100mm.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print