Inspired from the new Juggernaut Tactical Featureless grip. I used the same grip angle as the JT grip just in case anyone was curious.

EDIT: Model V1.1 uploaded, fixes fitment issues with thumb rest and lengthens bolt interface area.

EDIT: Model V1.2 uploaded, fixes issues with Magpul bolt fitment + includes fixes from V1.1

EDIT: Model V1.3 uploaded, makes rear 'fins' cradle the lower receiver much better + fixes very slight fitment issues.

EDIT: Model V1.4 uploaded, adds relief cuts for access to the safety switch more easily.

[Below are the print settings that are recommended, but you can change it as you please]

Printer Brand:
Creality

Printer:
Ender 3

Rafts:
Doesn't Matter

Supports:
No

Resolution:
0.1-0.3mm

Infill:
30-99%

Notes:
My recommendation for the print quality would be 0.2mm layer height, 40% infill, and 4x 1.6mm walls.

Category: Parts

AR Featureless Grip v1.4

Hobby & Makers / Other Ideas

♥ 84⬇ 2.0k🖨 4 prints

Print profiles

JT_Featureless_Grip_V1.3.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
JT_Featureless_Grip_V1.2.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
JT_Featureless_Grip_V1.1.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
JT_Featureless_Grip_V1.4.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print