A simple test cylinder, good print to show how consistent or not your Z-axis is.
the Base is 2mm thick so you can measure if your z-offset is correct. The cylinder is 100mm so you can measure for your Z-axis e-steps. Base is 40mm x 40mm so you can check X and Y steps also!
Test cylinder - Z banding test
by Alberta3D · original on Printables ↗
3D Printers / Test Models
♥ 49⬇ 2.0k🖨 7 prints
License: Creative Commons — Attribution — Noncommercial ↗testcalibrationcylinderlayerheighttubefirstlayercalibrationxaxisrollzaxisoffsetcalibrationtestprintercalibrationheightzaxisadjustmentxyaxiszoffsetestepscalculateesteps
Print profiles
Hollow cylinder.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print