SpaceX Falcon Heavy Expansion Kit for Falcon 9 Model

This is an expansion kit for my SpaceX Falcon 9 Model found here: https://www.prusaprinters.org/prints/109824-spacex-falcon-9-model-kit

**Model Update: A new .stl file has been added that includes the beams that connect the boosters to the Falcon Heavy core stage. Print two of the "booster-core connector" files and use them as the top booster connections. Print two of the "booster connectors" for the bottom connections.

**Many of you asked, so here it is, the Strongback is now available here! https://www.prusaprinters.org/prints/109821-spacex-strongback

This kit allows you to build a Falcon Heavy as well as attach a Crew Dragon capsule (Dragon V2) to your model.

Instructions:

Print a complete Falcon 9 model from the link above as well as two additional first stages (pieces 1-4, landing legs, and grid fins.
Print 4 of the booster connectors and insert them into the 4 large holes in one of the Falcon 9 first stages. Connect the two addition first stages using the corresponding holes.
Print 2 booster nose cones and connect these to the top of the two boosters. These use the same rotate-to-lock connectors as the interstage on the original model.
Print the Crew Dragon capsule, trunk, and nose cone. Either the Dragon or the cargo fairings from the original model can be attached to the top of the core stage.

Print Settings

Printer:

Flashforge Creator Pro

Rafts:

Doesn't Matter

Supports:

Yes

Resolution:

.2 or better

Category: 3D Printing

SpaceX Falcon Heavy Expansion Kit for Falcon 9 Model

by chemteacher628 · original on Printables ↗

Learning / Physics & Astronomy

♥ 164⬇ 619🖨 4 prints

License: Creative Commons — Attribution — Noncommercial — Share Alike ↗dragonspacexspacerocketfalconcapsulenasathingiverse

Print profiles

Falcon_Heavy_Booster_Nose_Cone.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Booster_Connector.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Crew_Dragon.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Booster-Core_Connector.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Nose_Cone_Crew_Dragon.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Crew_Dragon_Trunk.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print