Print in the orientation of the STL files with support. The support contact face is nearly non-functional and you will not touch it, therefore even some roughness at that surface doesn't matter.
Be aware: OLED version is 3mm wider than NORMAL version (for V1/V2 model).
It is a tight fit, but does not take too much force for the Switch to be put in. If it is too tight on your printer, try enlarging it by 0,2 to 0,3%
Fits on a Prusa MK3 print bed, if turned at an angle (see pictures).
Nintendo Switch Grip for V1/V2 & OLED
by stevQ · original on Printables ↗
Toys & Games / Other Toys & Games
♥ 277⬇ 3.1k🖨 25 prints
Print profiles
Switch_Grip_NORMAL.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Switch_Grip_OLED.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print