I purchased a set of cobalt drill bits from banggood, but they came without any case, so I made one.
Note: The case is adjusted to the length of drill bits in my set, you can use attached OpenSCAD file to adjust case/cover to fit your particular set of drill bits.
After printing I used drill bits to fix holes in the base. I painted labels using 0.4mm and 0.2mm fineliners.
Print Settings
No rafts, no supports needed. I printed it with 0.2mm layer with 10% infill.
Parametric Drill Bit Case
by ksuszka · original on Printables ↗
Hobby & Makers / Tools
♥ 127⬇ 985🖨 8 prints
Print profiles
drill_bit_case_base_clearance_02.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
drill_bit_case_cover.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print