🖨️ Print Shop
Bullet Shooting Crossbow

Overview

This Crossbow is a remix of the awesome model of Arkoudaki Crossbow that can be found on Thangs 

A lot of modifications went into this for easier building and printing. Took me around 30h of work. 

  • Replaced plastic pins with seven M3x20mm button head screws and nuts
  • Increased width of outside black parts to fit 20mm screws and not 18mm screws (less common)
  • Added 45degree chamfer on Guide Right & Left & Tensionner for easier printing
  • Split Base part (Front) for easier printing with less support (still needs support for elastic hooks)
  • Slight adjustments on Base, Lockfront to have a little more play to build it
  • more I've forgot

All of this was possible thanks to Arkoudaki releasing CAD files. It would not have been possible without this. Have a look at the awesome models they have done.

This Prop throws plastic bullet that can harm if incorrectly manipulated. Files available on this website are provided "as is" without warranty of any kind, either express or implied. Use at your own risk.

Printing

Can be done with a Bed with at least 160mm*160mm. The biggest piece is 210mm*20mm. So if positioned diagonally it should fit.

There's full parts (bed at least 250*210) and split parts (bed at least 160*160mm). Use the ones that fits your workflow. 

Beware, if you print have elephant foot you will need to trim them before building. 

Parts can be printed in PLA with 3-4 walls and 20% infill.

You will need:

  • 7 M3x20mm and M3 nut (slim, the ones that comes in M3 nut boxes)
  • Elastic 2-3mm for Tent
  • A little spring (One from a ball pen cut to a correct length)

Building Steps

Use Screws in the slots and stack those parts in this order:

  • End plate handle right
  • Guide right
  • Mechanism (Right Full) or (Right Back and Right Bottom Split)
  • Line of Sight Top 
  • Line of Sight Bottom - Full or Front and Back Split

Add the firing mechanism parts like in the picture. 

  • Spring Bracket with Ball Pen Spring
  • Trigger
  • Disc
  • Safety Lock

I've used a ball pen spring that I've cut at an approximate size. A bit longer than the spring has room for: To have a little tension at rest for the Spring Bracket to come back in place.

Then finish to cover and tighten the screws

  • Mechanism left Part Full or Split parts
  • End plate handle left
  • Guide left

Next, the front base: put some glue in the holes where the pins go (I've used gel one that takes a bit more time to set). Snap the two parts together, and then put a book on it and some weight for the glue to dry.

Slide the Base (Front) into the crossbow. If you have an elephant foot, you will need to trim it before with an Exacto knife.

Slide in the “blockers”, I had a little trouble with it and had to set them in place “gently” with a hammer and a little wood piece (to avoid scratching). I've increased tolerances in the model since then.

Now pass an elastic, some knots and you are good to hunt some vampires ;)

Have fun

Bullet Shooting Crossbow

by VinS · original on Printables ↗

Costumes & Accessories / Props

♥ 326⬇ 1.5k🖨 15 prints

License: Creative Commons — Attribution — Noncommercial ↗propsbulletcrossbow

Print profiles

  • Lock Front Right.stl

    ⏱ time and weight estimated after preparation · 1 material(s)

    Made to order: we prepare this file when you order, which adds a few minutes before printing starts.

    Prints on: A1 mini 0.4PLA

    Order this print

  • Lock Front Left.stl

    ⏱ time and weight estimated after preparation · 1 material(s)

    Made to order: we prepare this file when you order, which adds a few minutes before printing starts.

    Prints on: A1 mini 0.4PLA

    Order this print

  • Base Front Bottom.stl

    ⏱ time and weight estimated after preparation · 1 material(s)

    Made to order: we prepare this file when you order, which adds a few minutes before printing starts.

    Prints on: A1 mini 0.4PLA

    Order this print

  • Base Front Top.stl

    ⏱ time and weight estimated after preparation · 1 material(s)

    Made to order: we prepare this file when you order, which adds a few minutes before printing starts.

    Prints on: A1 mini 0.4PLA

    Order this print

  • bullet0.05tolerance.stl

    ⏱ time and weight estimated after preparation · 1 material(s)

    Made to order: we prepare this file when you order, which adds a few minutes before printing starts.

    Prints on: A1 mini 0.4PLA

    Order this print

  • bullet0.1tolerance.stl

    ⏱ time and weight estimated after preparation · 1 material(s)

    Made to order: we prepare this file when you order, which adds a few minutes before printing starts.

    Prints on: A1 mini 0.4PLA

    Order this print

  • Disc.stl

    ⏱ time and weight estimated after preparation · 1 material(s)

    Made to order: we prepare this file when you order, which adds a few minutes before printing starts.

    Prints on: A1 mini 0.4PLA

    Order this print

  • Spring Bracket.stl

    ⏱ time and weight estimated after preparation · 1 material(s)

    Made to order: we prepare this file when you order, which adds a few minutes before printing starts.

    Prints on: A1 mini 0.4PLA

    Order this print

  • Safety Lock.stl

    ⏱ time and weight estimated after preparation · 1 material(s)

    Made to order: we prepare this file when you order, which adds a few minutes before printing starts.

    Prints on: A1 mini 0.4PLA

    Order this print

  • Trigger.stl

    ⏱ time and weight estimated after preparation · 1 material(s)

    Made to order: we prepare this file when you order, which adds a few minutes before printing starts.

    Prints on: A1 mini 0.4PLA

    Order this print

  • Guide Right.stl

    ⏱ time and weight estimated after preparation · 1 material(s)

    Made to order: we prepare this file when you order, which adds a few minutes before printing starts.

    Prints on: A1 mini 0.4PLA

    Order this print

  • End Plate Handle Right.stl

    ⏱ time and weight estimated after preparation · 1 material(s)

    Made to order: we prepare this file when you order, which adds a few minutes before printing starts.

    Prints on: A1 mini 0.4PLA

    Order this print

  • End Plate Handle Left.stl

    ⏱ time and weight estimated after preparation · 1 material(s)

    Made to order: we prepare this file when you order, which adds a few minutes before printing starts.

    Prints on: A1 mini 0.4PLA

    Order this print

  • Guide Left.stl

    ⏱ time and weight estimated after preparation · 1 material(s)

    Made to order: we prepare this file when you order, which adds a few minutes before printing starts.

    Prints on: A1 mini 0.4PLA

    Order this print

  • Line of Sight - Top.stl

    ⏱ time and weight estimated after preparation · 1 material(s)

    Made to order: we prepare this file when you order, which adds a few minutes before printing starts.

    Prints on: A1 mini 0.4PLA

    Order this print

  • Line of Sight - Bottom Front - Split.stl

    ⏱ time and weight estimated after preparation · 1 material(s)

    Made to order: we prepare this file when you order, which adds a few minutes before printing starts.

    Prints on: A1 mini 0.4PLA

    Order this print

  • Line of Sight - Bottom Back - Split.stl

    ⏱ time and weight estimated after preparation · 1 material(s)

    Made to order: we prepare this file when you order, which adds a few minutes before printing starts.

    Prints on: A1 mini 0.4PLA

    Order this print

  • Line of Sight - Bottom - Full.stl

    ⏱ time and weight estimated after preparation · 1 material(s)

    Made to order: we prepare this file when you order, which adds a few minutes before printing starts.

    Prints on: A1 mini 0.4PLA

    Order this print

  • Elastic Tensioner.stl

    ⏱ time and weight estimated after preparation · 1 material(s)

    Made to order: we prepare this file when you order, which adds a few minutes before printing starts.

    Prints on: A1 mini 0.4PLA

    Order this print

  • Mechanism Right Back - Split.stl

    ⏱ time and weight estimated after preparation · 1 material(s)

    Made to order: we prepare this file when you order, which adds a few minutes before printing starts.

    Prints on: A1 mini 0.4PLA

    Order this print

  • Mechanism Right Front - Split.stl

    ⏱ time and weight estimated after preparation · 1 material(s)

    Made to order: we prepare this file when you order, which adds a few minutes before printing starts.

    Prints on: A1 mini 0.4PLA

    Order this print

  • Mechanism Left Back - Split.stl

    ⏱ time and weight estimated after preparation · 1 material(s)

    Made to order: we prepare this file when you order, which adds a few minutes before printing starts.

    Prints on: A1 mini 0.4PLA

    Order this print

  • Mechanism Left Front - Split.stl

    ⏱ time and weight estimated after preparation · 1 material(s)

    Made to order: we prepare this file when you order, which adds a few minutes before printing starts.

    Prints on: A1 mini 0.4PLA

    Order this print

  • Mechanism Left - Full.stl

    ⏱ time and weight estimated after preparation · 1 material(s)

    Made to order: we prepare this file when you order, which adds a few minutes before printing starts.

    Prints on: A1 mini 0.4PLA

    Order this print

  • Mechanism Right - Full.stlDEFAULT

    ⏱ time and weight estimated after preparation · 1 material(s)

    Made to order: we prepare this file when you order, which adds a few minutes before printing starts.

    Prints on: A1 mini 0.4PLA

    Order this print