The second picture with the red ribbon is Version 2 with the updated missile! It's much cleaner to print now - Enjoy!

I printed this in Cura at .12mm for super high definition. 9.5mm (3/8") ribbon wraps perfectly around the model - but isn't needed for the missile to attach to the toad. The missile and toad attach by a small fitting. I've updated the missile for the model! This allows you to print the missile and the cone separately. The missile you will print with a brim with the tail fins upward. The cone and missile have a hole in the middle that fits a piece of filament, making lining up the two pieces much easier. They just need a dab of superglue to put them together.

Print the Toad, Rocket Body, and Rocket Cone. The two rocket pieces will need to be glued together, and you can use a piece of filament to line the two parts up. The rocket then fits into the top of the Toad! Now the cone and rocket body can be easily printed as two-tone!

The “combined” file is for illustration purposes only. 

Change-log:

• Slightly larger model size
• Separated rocket into two pieces for easier printing
• Removed unnecessary “BeardRobot” text from the bottom