If you don't have a 3D-printer you can buy a set of 3 pcs printed here → Buy it here!
The cable organizer is designed to fit all standard USB type cables with a diameter of 3-5mm.
2 slots for 2mm cable.
2 slots for 3mm cable.
2 slots for 4mm cable.
Print instructions:
Layer: 0.2
Perimeters: 2
Infill: 15%
Material: PLA (or whatever you prefer).
Update: 31 Dec 2021.
Upon request from Hobson318 A longer and wider version but still same slot sizes now available for download.
Update: 14 Nov 2021.
Print came out very nice and super flexible without loosing the ability to hold the cable when printed in SainSmart TPU. (see last 3 pictures)
0.2 layer.
20% infill.
2 perimeters.
Inspired by SpaceDog3D design.
Happy Printing :)
Discaimer:
The design can cause kinks, excessive wear and damage to some cables over time, and the use of this design is at your own risk!
Simple Cable Organizer.
by DFV Tech · original on Printables ↗
Hobby & Makers / Organizers
♥ 7.4k⬇ 27.2k🖨 789 prints
Print profiles
Cable 8 fat v1.stlIN STOCKDEFAULT
⏱ 17m · 9 g · 34 × 76 × 15 mm · 1 material(s)
Prints on: A1 mini 0.4PLA
Order this print
Cable 8 fat longer and wider v1.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print