PiMesh4 is a Raspberry Pi 4 case with a geometric mesh pattern that is easy to print.

This is a mostly toolless design with a friction fit. There are two versions of the model – one totally toolless – one that utilizes a single m2 countersunk screw 10-16mm in length (recommended).

Update: added a dinn mount.

This is designed for 3d printing and utilizes no supports and utilizes only 25 grams of filament.

To assemble the case:

1) First, insert the Raspberry Pi 4, insert the corner with the ethernet port first, then set the Pi PCB into the remaining posts.

2) Next, affix the lid starting with the side nearest the ethernet port.

3) Finally, screw in an m2 countersunk screw 10-16mm in length on the underside.

Update:
Added a version of each (tool-less and m2 screw versions) that allow access to micro SD card.

Category: Electronics

Raspberry Pi 4 Case – PiMesh4

by FlyAttack · original on Printables ↗

Hobby & Makers / Electronics

♥ 187⬇ 2.7k🖨 52 prints

License: Creative Commons — Attribution — Noncommercial ↗raspberrypiraspberrypicaseraspberrypi4thingiverseraspberrypi4case

Print profiles

Raspberry_Pi_4_Case_Toolless__Bottom_PiMesh_Case.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
pi-mesh-din-rail.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Raspberry_Pi_4_Case_M2_Screw_Top_PiMesh_Case.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Raspberry_Pi_4_Case_M2_Screw_Combined_PiMesh_Case.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Raspberry_Pi_4_Case_Toolless__Top_PiMesh_Case.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Raspberry_Pi_4_Case_Tooless_and_SD_Card_Slot_Bottom_PiMesh_Case.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Raspberry_Pi_4_Case_M2_Screw_Bottom_PiMesh_Case.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Raspberry_Pi_4_Case_Toolless__Combined_PiMesh_Case.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Raspberry_Pi_4_Case_M2_Screw_and_SD_Card_Slot_Bottom_PiMesh_Case.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print