3 knock down targets for rubber band guns. May also work for airsoft bb's, but the targets are designed to fall over with very little force. For best results, mount the base down or add weight to it to help keep it stationary. If you don't do this, sometimes the weight of the target falling will shake the base and knock over the other targets. You could just also give the stops a little sanding so that they lean forward more and will be less likely to be easily knocked over. You can always fine tune the amount of lean for the application your using this for.

Print Settings

Printer Brand:

FlashForge

Printer:

Dreamer

Rafts:

No

Supports:

No

Resolution:

.180 is what I used.

Infill:

85% is what I used.

Notes:

I printed these out of PLA. The base is thin enough that it allows just enough flex to insert the nubs on the target paddles into the base holes.

Category: Toys & Games