11/17/23
Printables does not accept EASM files. so on this Thingiverse page (https://www.thingiverse.com/thing:3894352/files) you can find a an EASM file of the whole Furious assembly. With an EASM Viewer, you can rotate the Furious in 3D space, highlight individual parts, do blowups, etc. Hopefully the file will answer some of the assembly questions that the Build Notes do not. Please message me if you found this way of documenting the design useful, or if you didn't. Thanks!
You can download a free EASM viewer here.
https://www.edrawingsviewer.com/download-edrawings, it's called 'eDrawings (64bit)'.
4/8/23
One of the bearing holes for in the L1 Escape Wheel was undersized.
I posted an L1 Escape Wheel 3.STL file that corrects this error.
6/10/21
Updated the Base_Drive_Plate.STL, Base_Drive_Plate_a.STL, Base_Drive_Plate_b.STL, Base_Drive_Outer_Ring.STL, Base_Drive_Outer_Ring_a.STL, and Base_Drive_OuterRing b.STL files.
1/21/21
FYI, To keep more up to date with what I'm doing I started an Instagram page @mcmaven.pdx, where I'm posting some of my 3D printing and other designs that I haven't posted here.
11/19/20
I'm pleased to announce that MakerRx is now offering a kit of all the non-printed parts that you need to assemble the Furious, e.g. the Nano, the stepper and driver board, the shafts cut to length, ball bearings, etc.
After using their kit to assemble the Flathead V8, I contacted them about creating kits for my designs. I found the cost of their kits very reasonable, especially when you consider that in some cases you only need 2 or 3 screws of a particular size, but you have to order a minimum of 25 of each size, some parts are hard to find, and you have to pay shipping on each of the items that you order. Pulling all the parts together for a complicated make can get expensive and take a lot of time. And in several cases, the parts that I ordered didn't fit and I had to order different ones. The bottom line, is that if you do the math on ordering the parts yourself and include shipping, you will have a hard time beating the price of their kit.
You can order the MakerRx Furious kit here:
https://www.makerrx.com/products/twin-turbo-furious-tourbillon-kit
You can also talk to MakerRx about printing the Furious parts if you don't have a printer. I feel that their prices are very reasonable, especially when compared to a printing service like Shapeways.
10/25/20
Posted split versions of largest parts to enable printing on smaller printers.
Base Drive Cover Half.STL , only one file is needed because it is symmetric.
Base Drive Plate a.STL
Base Drive Plate b.STL
Base Drive Outer Ring a.STL
Base Drive Outer Ring b.STL
L3 Frame Ring Gear Half.STL , only one file is needed because it is symmetric.
Read section 9.1 in the Build Notes on how to glue these parts together. Note: Figure out exactly how the parts are going to fit together, and how you are going to hold them before you apply the Methylene Chloride solvent. Then work quick! The solvent sets in seconds, and it is easy to end up with misaligned parts! Also it can damage surface finishes. I normally glue things on the waxed steel top of my table saw. But I have also used a large sheet of flat cardboard. And as the parts are held together, move them around a little, so the the part isn't glued to the cardboard, otherwise you may have to scape the cardboard off glue joints. You only have to do this for 30 seconds or so, because the solvent dries so fast. Also, the solvent is basically set after a couple of seconds, but the joint is still soft. I normally wait 24 hours before I use glued parts to ensure that the plastic softened by the solvent has hardened.
6/6/20
Added new version of L1 Frame Base Bridge Main 2 STL that provides a Balance Wheel alignment slot, to make setting up the escapement easier. See section 7 in the build notes for more information.
12/2/19
Added some photos of the Arduino, stepper, and rotary encoder wiring. I bent all the pins on the Nano 90 degrees, to make them easier to access them. In some cases I soldered wires with shrink wrap covers, and others I used Arduino Breadboard Wires, that slip on pins. The ground signal between the Arduino (black) and Stepper Driver board (Orange) is soldered together. The +5V signal between the Arduino (red), Stepper Driver board (Yellow), and the rotary encoder (yellow) is also soldered together. Refer to the schematic for more information.
11/16/19
Changed screw lengths to minimize stripping screws.
Posted new zip file (Thingiverse files 110519.zip) that includes updates to the following STL files:
L2 Lower Body
L2 Lower Body Trellis2
Base Drive Cover
11/5/19
Posted new zip file (Thingiverse files 110519.zip) that includes updates to the following STL files:
Base Drive Outer Ring a and b
Base Drive Plate
L2 Lower Body
L2 Upper Body
L3 Bearing Race a and b
L3 Bearing Race Lower
The files include changes to make assembly easier, e.g. changing dimensions to provide more clearance and reduce the need to sand or file parts to get them to work smoothly.
Also, use M2x4mm cap head screws to attach the stepper motor to the Base Drive Plate. If you use M2x6mm screws, they go through the Base Drive Plate, and rub against the L3 Bearing Race Lower part, preventing it from turning.
10/19/19
Added the 2x1mm_Bearing_Spacer.STL file.
10/3/19
The TT Furious page has been broken since I created it. In an effort to fix the problem simplified the upload by only uploading one file "TT Furious files xxxx19.zip" file instead of over 70 STL, INO, JPG, and PDF files. If this does not work, you can also download the files from:
https://cults3d.com/en/3d-model/gadget/tt-furious.
I modeled this design after a Jacob and Co. Twin Turbo Furious watch. I spent many hours looking at videos and images that I found on the web of the original watch.
Similar to the Gyrotourbillon and the Triple Axis, I tried to make the model an accurate (scaled up) version of the original Furious tourbillon mechanism. I printed plastic screws to scale and used them as caps to cover the steel screws that actually hold it together.
This is a real-time video of it, https://youtu.be/2-7S2i6AUyM
Also it's quite large, with a diameter over 200mm.
In this design, I've included several versions of the Balance Shaft and the Fork which will give you some alternatives to get it to tick easier.
Please read the Overview in Build Notes to get a better feel for the constraints of this design.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
Yes
Resolution:
1.5mm
Infill:
15
Filament: Hatchbox, CC3D Silk PLA Transparent Red, Black, Gold, Silver, Copper
Category: 3D Printing
TT Furious Tourbillon
by mcmaven · original on Printables ↗
Hobby & Makers / Other Ideas
♥ 573⬇ 1.9k🖨 1 prints
Print profiles
Base_Drive_Outer_Ring_b.STLDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Base_Drive_Cover_Half.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Base_Drive_Plate_a.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Base_Drive_Plate_b.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
L3_Frame_Ring_Gear_Half.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Base_Drive_Plate.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Base_Drive_Outer_Ring.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
L1_Frame_Base_Bridge_Main_2.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Base_Drive_Outer_Ring_a.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Base Drive Outer Ring a.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Base Drive Plate.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Screw 7mm End Cap.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Base Drive Inner Disk.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
L3 Bearing Race Inner b.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Screw 20mm.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
L3 Bearing Race Lower.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
L2 Crown Bearing Washer.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Base Drive.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
L3 Frame.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
L3 Frame Support.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
L2 Upper Body Loading Plate Lower.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
L3 Crown Gear b.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
L1 Balance Spring.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Base Drive Outer Ring b.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
L3 Frame Ring Gear.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
L1 Frame Base Bridge Inner.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
L1 Fork.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Screw 9mm Seat.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
2x1mm Bearing Spacer.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
L2 Torque Spring.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
L1 Balance Spacer.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Screw 12mm w screw hole.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Screw 12mm.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
L2 Drive Gear.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Jewel 11mm.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
L2 Shaft Spacer 2.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
L3 Bearing Race Inner.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Stepper Pinion.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
L2 Upper Body Loading Plate Pin.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
L1 Fork 2.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
L3 Bearing Race Guide.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Jewel 6mm.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
L1 Bearing Spacer Upper.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
L1 Bearing Spacer Lower.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
L3 Crown Gear a.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
L1 Balance Wheel.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
L1 Frame Base.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
L1 Balance Spring End Mount.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
L2 Lower Body.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Base Drive Cover2.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
L1 Fork 3.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
L3 Bearing Race Upper.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
L3 Bearing Race Inner a.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
L2 Lower Body Trellis2.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
L1 Frame Base Alignment Pin.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
L3 Bearing Holder.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Base Drive Outer Ring.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
L1 Balance Shaft 3.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
L2 Cap Screw.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
L2 Upper Body.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
L2 Torque Spring Washer.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
L1 Balance Shaft 2.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
L2 T25 M2 3mm Gear.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
L2 Counter Weight Cap.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
L2 Upper Body Loading Plate Upper.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
L2 Thrust Bearing Washer.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
L3 Crown Gear.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Screw 9mm w screw hole.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
L1 Balance Shaft.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
L1 Frame Base Bridge Main 2.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
L1 Escape Wheel 3.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Screw 10mm.STL
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print