Add a pen. Put the screws.

Use the middle screw to lock/unlock the compass. You don't need to overtight the screw to lock the compass. A short pressure should be enough.

2 versions :

Plastic point : 100% printed compass.

Use a small file to make a sharp point but it remains a plastic point.

Metal point : if you want a more precise compass, use this one.

You will need to cut the point of a pin and insert it in the small hole. This version has an articulated point protector to avoid holes in pockets and cases.

Print Settings :

Printed on MK3S
Filament tested : PLA - PETG
Nozzle 0.4mm : 0.20mm tested
Scale : 100% (PLA) and 130% (PETG) tested

Use this compass lightly, don't overtight the middle screw and you will draw very precise circles !

Universal Compass - Print-in-place

by M4NU · original on Printables ↗

Hobby & Makers / Tools

♥ 351⬇ 1.9k🖨 32 prints

License: Creative Commons — Attribution ↗geometryprintinplacearchitecturedividerdrawingmathematicscirclescompas

Print profiles

Universal Compass.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Universal Compass MetalPoint Project.3mf
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
Universal Compass MetalPoint.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print