A simple long hose retainer for better routing of the long hose on a long hose setup. Useful if you are using a long hose setup but the canister for your light is mounted on your back-gas tanks, the canister is to short to retain the long hose or if you use a non-canister torch.

This retainer is modeled after the Apeks retainer, have made modifications to make it easier to print.

Print Settings

Printer:

Original Prusa I3 MK3

Rafts:

Supports:

Resolution:

0.2

Infill:

Notes:
Print it horizontally with the flat side on the build plate for best strength. I printed it in PETG with 5 bottom and top layers and 4 outline shells and 60% infill.
How I Designed This

Designed in Fusion 360 and sliced with simplify 3D

Category: Sport & Outdoors

Simple Long Hose retainer (SCUBA)

by JBoneng · original on Printables ↗

Sports & Outdoor / Other Sports

♥ 22⬇ 615🖨 3 prints

License: Creative Commons — Attribution ↗hosethingiverseretainerscubascubadivinglonglonghose

Print profiles

LongHoseHolder.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print

Print Settings

Notes: Print it horizontally with the flat side on the build plate for best strength. I printed it in PETG with 5 bottom and top layers and 4 outline shells and 60% infill. How I Designed This

Simple Long Hose retainer (SCUBA)

Print profiles

Notes:
Print it horizontally with the flat side on the build plate for best strength. I printed it in PETG with 5 bottom and top layers and 4 outline shells and 60% infill.
How I Designed This