A Trilobite style line cutter, perfect as a backup line cutter while scuba diving, climbing, outdoor, survival, etc. prints in two parts that snap together and are secured with two M3 bolts totaling 10mm.
WARNING: The utility knife blades are by definition razor-sharp, so be careful and don't cut yourself.
Additional HW needed:
2x M3x10mm bolts (stainless steel)
2x M3 Hex nut (stainless steel)
1x Rectangular utility knife blade, the same type as used in Eezycut Trilobite cutters (see picture for reference)
After printing, put the blade in the blade pocket of one of the halves, press and snap the two halves together, and secure it by screwing the bolts through the designated holes with the nuts placed in their designated holes at the opposite side.
The line cutter sheath was designed by Robert Borthwick (@RobertBorthw_1855651) and can be found at https://www.printables.com/model/790013-sheath-for-trilobite-style-line-cutter
The sheath model was uploaded to this model make page with permission.
Print Settings
Printer:
Prusa I3 Mk3
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
50%
Filament: Generic PETG Whatever you want
Category: Sport & Outdoors
Trilobite style line cutter - scuba, climbing, survival, etc
by JBoneng · original on Printables ↗
Sports & Outdoor / Other Sports
♥ 108⬇ 644🖨 4 prints
Print profiles
LineCutterBottom.stlDEFAULT
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
LineCutterTop.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print
line_cutter_sheath.stl
⏱ time and weight estimated after preparation · 1 material(s)
Made to order: we prepare this file when you order, which adds a few minutes before printing starts.
Prints on: A1 mini 0.4PLA
Order this print